RELY+ON™ VIRKON™:
STOP THE SPREAD OF COVID-19 WITH A
POWERFUL VIRUCIAL DISINFECTANT
In a post-COVID-lockdown world, the best next actions are utmost caution and prevention. Facility managers for hospitals, commercial buildings, warehouses, and public spaces like you should take the first step in mitigating the risk of contamination. You can start by disinfecting your vicinity with a virucidal disinfectant approved by the U.S. Environmental Protection Agency (EPA).
EPA has released a list of disinfectants that can kill coronavirus strains such as the Sars-Cov-2, the virus causing the highly infectious COVID-19. One of those approved disinfectants is the Rely+On™ Virkon™ powder.
Protect your workforce and facility with a powerful virucidal disinfectant
Rely+On™ Virkon™ is powerful EPA-approved virucidal disinfectant powder. You can mix it with water and spray it on equipment or hard surfaces that get a lot of contact and where viruses and germs linger—elevator buttons, stair railings, tabletops, or doorknobs.
Considered as one of the most in-demand EPA-approved virucidal disinfectants in China, you should use Rely+On™ Virkon™ for these reasons:
It kills disease-causing viruses and food-borne pathogens.
Rely+On™ Virkon™ disinfectant cleaner powder is specifically designed to inactivate common viruses that harm humans—the Sars-Cov-2, Influenza virus, Salmonella, Norovirus—those are just a few. It also eradicates pathogens like E-Coli and the Hepatitis A Virus. The other virucidal agent by Lanxess, Virkon™ S, meanwhile, serves a different purpose—it kills coronaviruses of animal origin.
It’s convenient and easy-to-use.
You won’t need other cleaning materials to use Rely+On™ Virkon™ other than tap water. You can also prepare it within minutes. Just mix a 5g powder with water into a spray bottle to create a 1% solution and wait until it dissolves. After that, you can spray this virucidal disinfectant on surfaces like floors, walkways, as well as walls and let it sit for 10 minutes. For food contact surfaces, complete the disinfection process by rinsing it with water after. For non-food contact surfaces, just let it air dry.
Rely+On™ Virkon™ has a broad-spectrum formulation.
This virucidal disinfectant does not only work on laboratory and research equipment like pipette discard jars and centrifuges. You can also use it at treatment salons and residential buildings, where foot traffic can increase at a given time in a day. Spray it on glass doors, metal door handles, doorknobs, and more to minimize risks of virus transmission. Rely+On™ Virkon™ cleaner powder strongly works on medical facilities too, perfect for disinfection of emergency departments and decontamination of operating rooms as well as hospital wards where spillage of bodily fluids is common.
It doesn’t take too much storage space.
You can easily store pails of Rely+On™ Virkon™ powder in your facility’s storage area. You don’t need special equipment to store this virucidal disinfectant. Putting it in a dry and safe place that you and your team can easily access is enough. Moreover, you save so much space with 1 pail of Rely+On™ Virkon™ that equals 81 bottles of a 210 oz disinfecting solution from a competitor brand. Three pails of it can cover one football field.
You can use this virucidal disinfectant as an absorbent for bodily fluids.
Nausea and vomiting are two of the most common COVID-19 symptoms. Avoid any possibility of virus transmission in your facility by using Rely+On™ Virkon™ to absorb bodily fluids on hard surfaces and clean it afterwards. Just cover the entire soiled area with the powder and let it dry for 10 minutes. Scoop the biohazard waste in a plastic and clean the area with the Rely+On™ Virkon™ 1:100 solution for complete disinfection.
It passed EPA’s test conditions.
Rely+On™ Virkon™ passed EPA’s performance assessment, proving inactivation of the coronavirus strain at a 1:100 dilution rate in non-porous surfaces like hospital equipment and metal fixtures. Compared to bleach (hypochlorite), which can be corrosive to metal surfaces, Rely+On™ Virkon™ is less reactive. Moreover, unlike bleach, Rely+On™ Virkon™ remains stable and can inactivate viruses and pathogens up to seven days after application.
It’s NSF-approved.
Rely+On™ Virkon™ is a virucidal disinfectant approved by the National Sanitation Foundation (NSF), certified to follow strict public health and safety standards. It’s an oxygen-based disinfectant that is easy on the eyes and skin, so you won’t feel any sting when you use it.
How to disinfect your facility using Rely+On™ Virkon™
Rely+On™ Virkon™ is one of the most in-demand, EPA-approved virucidal disinfectants for both non-porous, food contact and non-food contact surfaces. Here’s how to use it to destroy viruses in your facilities:
Wear the right protective equipment.
Ensure you’re wearing the right personal protective equipment (PPE) when mixing the Rely+On™ Virkon™ powder with tap water. Protect your hands, eyes, and skin from irritation by wearing reusable rubber gloves, a face mask or face shield, and boots. These will protect you against splashes when mixing the solution or spraying it on your facilities.
Make sure there’s proper ventilation.
Make sure to open the windows and doors to avoid stuffiness in the room. This will provide you with good indoor air circulation, which will prevent the spread of infectious air droplets. Poor air circulation is closely related to the spread of disease as per a report from the World Health Organization (WHO).
Remove gross dirt first.
The Centers for Disease Control (CDC) recommends cleaning surfaces with soap and water before using disinfectants. This thins out the grime, oil, or dust, which is called gross dirt, minimizing germs and pathogens to deal with.
Remove gross dirt first before applying Rely+On™ Virkon™. If you’re disinfecting a food contact surface, pre-wash the surface or wipe it with a clean cloth to remove the gross dirt. Let it dry for a few minutes before you proceed to the next step. If you’re disinfecting a non-food contact surface, remove the gross dirt until the surface is visibly clean.
Prepare the 1:100 solution.
If you’re using a spray bottle, pour 32oz of water into it. Scoop two (2) teaspoons of Rely+On™ Virkon™ and pour it into the bottle. Shake thoroughly to dissolve the powder. Spray it on the area and let it air dry for 10 minutes.
If you’re cleaning a wider, non-food contact area, pour one (1) gallon of water into a bucket with a cover. Scoop eight (8) teaspoons and pour them all into the bucket filled with water. Cover the bucket and shake it to dissolve the powder. Dip your mop into the solution and start cleaning the floor space with the Rely+On™ Virkon™ solution. Let it air dry for 10 minutes.
Sanitize yourself and your cleaning tools.
After disinfecting your facilities, you can relax now, right? Not quite yet. Be sure to sanitize your hands and your cleaning tools. Wash your hands thoroughly with a foamy antibacterial soap and water.
As for your brushes, mops, and sponges, soak them in a solution of disinfectant and water in a bucket. Dip your rubber gloves into hot water and mild detergent. Let them dry. Lastly, don’t forget to store and secure them, including the Rely+On™ Virkon™ pails, in a dry storage room away from children.
Order Rely+On™ Virkon™, the powerful virucidal disinfectant against COVID-19.
Rely+On™ Virkon™ can prevent the spread of Sars-Cov-2 in commercial and industrial facilities, public and residential buildings, schools, and hospitals. COVID does not stand a chance with this virucidal disinfectant so cleaning your facilities with it ultimately helps protect yourself, your loved ones, colleagues, and others from the spread of COVID-19.
Order Rely+On™ Virkon™ from Microscope.com today, a trusted provider of COVID-19 PPEs as well as lab equipment for COVID research and testing.