Filters

Brand

Brand

Shop by filtering the results with a selected microscope brand(s). See our brand descriptions for further information on each brand.

1. Dino-Lite 1
2. Motic 4

Resolution Class

Resolution Class

This filter allows you to select a camera by the resolution (megapixels) of the camera. Unless you are doing high quality printing, additional resolution over 3 megapixels may be wasted since most computer monitors have maximum resolution of approximately 2 megapixels. Also, higher resolution typically involves slower refresh rates and, therefore, less effective live imaging.

1. 1.3 Megapixel 1
2. 3 Megapixel 1
3. 5 Megapixel 2

Camera Interface

Camera Interface

Firewire is a brand name for IEEE Serial Business Bus or in plain language, a higher speed alternative to USB. It is more commonly used in professional applications.

RCA Composite Video is an analog output designed for computer monitors and TVs. Look for acronyms such as NTSC or AVi.

USB 2.0 Most microscope cameras output via USB 2.0 - the standard for output to computers, cell phones and other personal devices.

USB 3.0 is a new 'Superspeed' USB connection, currently found on a limited range of products, whether microscopy or other.

VGA is also an analog signal for output to computer monitors or to HDTV rather than computers.

1. WiFi 2
2. USB 2.0 2
3. HDMI 2

Head Type

Head Type

Monocular microscopes have a single eyepiece. Always keep both eyes open when using a monocular microscope.

Binocular heads have two eyepieces.

Trinocular heads have two eyepieces plus an additional port to which a camera can be attached for still and live imaging.

Digital Only are digital microscopes with no eyepieces to view the specimen with the naked eye.

1. Binocular 1

Objective Lens

Objective Lens

Different color light passes through curved glass (a lens) at different angles. Achromatic lenses 'correct' for this 'spherical aberration' in order to bring the light rays into focus on the same plane.

The better the lens, the greater is the amount of correction or 'flat field'.
There are three common achromatic lenses:

• Achromatic - Standard on most microscopes with 65% flat field .
• Semi-Plan - Better quality with 80% flat field
• Plan - Premium lenses with 95% flat field

Most applications only require standard achromatic lenses. Semi-plan and plan lenses are typically for professional use.

Please note that Semi Plan and Plan filters also include E-Plan, S-Plan and U-Plan objectives.

1. Plan 1

System Type

System Type

Brightfield microscopes use transmitted (illuminated from below) white light that is absorbed by denser (darker) areas of the specimen to create contrast.

Darkfield microscopes improve the contrast in unstained, transparent specimens. They use scattered light that is not collected by the objective lens and so the light will not form part of the image. As a result, the specimen is illuminated against a dark background.

Epi-Fluorescence microscopes use the phenomena of fluorescent and phosphorescent light instead of, or in addition to, reflection and absorption.

Inverted microscopes are used to view specimens that require more working space than a slide. For example, specimens in containers such as petri dishes. They are also used for polished metal specimens where reflected light is required. The objectives are located below the stage while the light source and condenser are above the stage.

Metallurgical microscopes are a form of inverted microscope. They are designed for opaque or polished metal specimens that require high magnifications, but with reflected illumination (more typical in a stereo microscope).

Phase Contrast microscopes enable greater contrast in transparent specimens (protozoa etc) without the use of stains. Invented by Fritz Zernike, they convert small phase shifts in the light passing through the specimen into changes in contrast.

Polarizing microscopes employ polarized light that show changes in internal structure and composition of material not discernible with ordinary light.

Portable microscopes employ rechargeable LED batteries so they can be used outside in the field.

Teaching microscopes employ two or more microscope heads so that teacher and students can view the specimen, simultaneously.

1. Brightfield 1
2. Digital 1

Camera Mount

Camera Mount

C-Mount is a standardized camera lens mount that measures 1" in diameter and 32 threads per inch.

Ocular Mounts enable a microscope camera to be attached to a microscope ocular via an adapter tube. Typically, used on a trinocular port, an ocular mount can also work on monocular and binocular microscopes either by removing an eyepiece or, less commonly, by mounting an adapter over the eyepiece.

1. C-Mount 3
2. Ocular Mount 1

Sensor Type

Sensor Type

CMOS (complementary metal oxide semiconductor) and CCD (charge coupled device) image sensors are two different technologies for capturing images digitally. Each has unique strengths and weaknesses, although there are no clear dividing lines.

CCD cameras have traditionally provided the highest image quality at the expense of system size and cost. This is beginning to change with the advent of S-CMOS sensors.

CMOS cameras offer more functions on the chip with lower power dissipation, but they have often required tradeoffs between image quality and cost.

As a result, most standard applications currently employ CMOS sensors with lower prices. More advanced applications, where highest image quality is essential, employ CCD sensors.

1. CMOS 4

Color/Monochrome

Color/Monochrome

Select a microscope camera with either monochrome or color sensor.

1. Color 4

Supported Operating Systems

Supported Operating Systems

You can filter the list of products by the type of operating system employed on your computer.

1. Windows 8 2
2. Windows 7 4
3. Windows Vista 4
4. Mac OSX 10.4+ 4
5. Windows XP SP3 4

Price

Price

You can filter the microscopes according to price. Simply click on your desired price range.

1. $0.00 - $1,000.00 4
2. $2,000.00 - $3,000.00 1